Menu
homeExcel

How to update, install the latest version of Camera RAW for Photoshop

File raw photo contains raw, uncompressed grayscale image data from a digital camera's photosensor, along with information about how the image was captured (metadata). Photoshop® Camera Raw interprets the raw image file based on camera information and image metadata to enable color image creation and processing.

You can think of a raw image file as a photographic negative. Such a file can be reprocessed at any time to achieve the desired results by changing parameters such as white balance, tonal range, contrast, color saturation and sharpness. When you make image adjustments to a raw photo, the original photo data remains unchanged. Adjustments are saved as metadata in the accompanying accompanying file, database, or the file itself (if using the DNG format).

When you shoot JPEG files, the camera automatically processes the JPEG file to improve image quality and compression. However, in this case it is almost impossible to control the progress of image processing. Capturing raw images with your camera allows you to have more control over the image than shooting in JPEG format because raw photos aren't limited by the processing done by the camera. Although JPEG and TIFF images can be edited in Camera Raw, they edit pixels that have already been processed by the camera. Raw image files always contain the original, raw pixel data captured from the camera.

To shoot with raw images, you must configure your camera to save files in the camera's raw image format.

Note.

The Photoshop Raw (.raw) format is a file format designed for transferring images between applications and computer platforms. The Photoshop Raw file format should not be confused with the Camera Raw file format. Camera Raw file extensions vary depending on the camera manufacturer.

Digital cameras capture and store raw image data with a linear curve of relative spectral sensitivity (gamma equal to 1.0). On the other hand, photographic film and the human eye are characterized by a nonlinear, logarithmic spectral sensitivity to light (gamma greater than 2). An unprocessed raw image viewed as a grayscale image may appear very dark because what appears twice as bright to the photosensor and computer does not appear so to the human eye.

For a list of supported cameras and more information about Camera Raw, see Support for Raw Photos from Digital Cameras.

For a list of cameras and supported versions of Camera Raw, see Cameras supported in Camera Raw.

About Adobe Camera Raw

Camera Raw is built into Adobe After Effects® and Adobe Photoshop as a plug-in. Camera Raw also extends the functionality of Adobe Bridge. Camera Raw lets you use each of these apps to import and work with raw photo files. Camera Raw can also be used to work with TIFF and JPEG files.

Note.

Camera Raw supports images up to 65,000 pixels in length or width and up to 512 megapixels in size. Camera Raw converts CMYK images to RGB when they are opened. For a list of supported cameras, see Digital Photo Raw File Support.

Adobe Bridge requires Photoshop or After Effects to be installed to open files in the Camera Raw dialog box. If Photoshop and After Effects are not installed, you can still preview images and their metadata in Adobe Bridge. If another application is associated with a particular image file type, you can open the file in that application directly from Adobe Bridge.

Adobe Bridge lets you apply, copy, and delete image settings, as well as display preview images and metadata associated with raw files without opening the files in the Camera Raw dialog box. The preview image in Adobe Bridge is a JPEG image created using the current image settings. These images should be distinguished from raw camera data, which appears as a very dark grayscale image.

Note. The caution icon that appears on thumbnails and preview images in the Camera Raw dialog box indicates that they are created from raw images.

You can change the default Camera Raw settings for certain camera models. For each camera model, you can also change the default values ​​for specific ISO settings or individual camera settings (by serial number). Image settings can be changed and saved as styles for later application to other images.

When you use Camera Raw to make adjustments to a raw photo (including straightening and cropping), the original raw photo data remains unchanged. Adjustments are saved either in the Camera Raw database as metadata embedded in the image file, or in accompanying XMP file (metadata file that comes with the raw image file). For more information, see Determine where to store Camera Raw settings.

After processing and editing a RAW file using the Camera Raw plugin, an icon appears on the image thumbnail in Adobe Bridge.

After opening a raw image file in Photoshop, you can save the resulting image in other formats, such as PSD, JPEG, Large Document Format (PSB), TIFF, Cineon, Photoshop Raw, PNG, or PBM. Using Photoshop's Camera Raw dialog box, you can save your processed files in Digital Negative (DNG), JPEG, TIFF, or Photoshop (PSD) formats. Photoshop Camera Raw allows you to open and edit a raw file, but does not allow you to save the image in raw format.

As new versions of Camera Raw are released, you can update the application by installing a new version of the plugin. You can check for Adobe software updates by choosing Help > Updates.

Different camera models store raw images in different formats, and the resulting data must be interpreted in light of those formats. Camera Raw includes profiles for many camera models and allows you to interpret a wide range of raw image formats.

About the Digital Negative (DNG) format

The Digital Negative (DNG) format is a non-proprietary, open source, and widely supported format for storing raw camera data. Hardware and software developers widely use the DNG format because it can provide a flexible workflow for processing and archiving raw image data. The DNG format can also be used as an intermediate format to store images that were originally captured using the camera manufacturer's own format.

Because DNG metadata is described in publicly available documentation, readers such as Camera Raw do not require camera-specific information to decode and process files produced by a camera that supports the DNG format. If support for a camera's native format is discontinued, users may no longer be able to access images stored in that format, resulting in permanent image loss. At the same time, since the DNG format is described in publicly available documentation, it is highly likely that raw images stored as DNG files will remain readable by software into the distant future, making the DNG format safer for archival storage .

Metadata related to image adjustments that are stored as DNG files can be embedded directly in the DNG file rather than being presented in an accompanying XMP file or Camera Raw database.

Raw photo files can be converted to DNG format using Adobe DNG Converter or the Camera Raw dialog box. For more information about the DNG format and the DNG Converter, see the Digital Negative (DNG) product page. To download the latest version of DNG Converter, go to the Adobe Downloads page.

Processing Images with Camera Raw

Copy raw image files to your hard drive, organize them, and convert (if necessary) to DNG format

Before you begin any work on the images presented in the raw files, you need to copy the image files from the camera's memory card, organize them, give them useful names, and do other preparatory steps. Using the command Get photos from camera Adobe Bridge can perform these tasks automatically.

Opening image files in Camera Raw

RAW files can be opened in Camera Raw from Adobe Bridge, After Effects, or Photoshop. You can also open JPEG and TIFF files in Camera Raw using Adobe Bridge.

Color adjustment

Color adjustments include adjustments to white balance, hue, and saturation. You can make most of the adjustments in the Basic tab, and then use the controls on the other tabs to fine-tune your results. If you want to analyze the image and apply rough tonal adjustments in Camera Raw, click the Auto button on the Basic tab.

To apply the settings that were used on a previous image, or to apply default settings specific to specific camera models, a specific camera, or ISO settings, choose the appropriate command from the Camera Raw Settings menu. (See Applying saved Camera Raw settings.)

Making other adjustments and corrections to the image

Use other tools and controls in the Camera Raw dialog box to perform image sharpening, noise reduction, distortion correction, and retouching.

(Optional) Save picture settings as a style or as default picture settings

To be able to apply the same adjustments to other images in the future, save the settings as a style. To save the adjustments you make as defaults that will apply to all images taken with a specific camera model, specific camera, or ISO settings, save the image settings as new Camera Raw defaults. (Cm. .)

Set file management options for Photoshop

Set options to control how the Camera Raw plug-in saves images and opens those images in Photoshop. Go to group settings File management by clicking the link below the preview image in the Camera Raw dialog box.

Save the image or open it in Photoshop or After Effects.

After you've finished adjusting the image in Camera Raw, you can continue working in one of the following ways: apply adjustments to the raw photo file, open the adjusted image in Photoshop or After Effects, save the adjusted image in a different format, or discard the adjustments. If the Camera Raw dialog box is opened from After Effects, the buttons Save image and “Done” become unavailable.

  • Save image Camera Raw settings are applied to the images, and copies of the images are saved in JPEG, PSD, TIFF, or DNG format. Press Alt (Windows) or Option (Mac OS) to open the dialog box. Camera Raw Save Options was not displayed, and the files were saved according to the last saved settings. (See Saving a raw image in a different format.)
  • "Open image" or "OK" Copies of raw image files open in Photoshop or After Effects (with Camera Raw settings applied). The original raw image file remains unchanged. Click the button Open image, holding down the Shift key to open the raw file in Photoshop as a Smart Object. To set Camera Raw settings, at any time, double-click the smart object layer that contains the raw image file.
  • Ready The Camera Raw dialog box closes and the file settings are saved in the raw image database file, the accompanying XMP file, or the DNG file.
  • Cancel Changes made in the Camera Raw dialog box are discarded.

Camera Raw Dialog Box Overview



A. Camera name or file format B. Switch to full screen mode C. Examples D. Image correction tabs E. Image settings menu and Camera Raw F. Adjustment sliders G. Preview Options H. File management I. Scale values

Note.

  • Some controls such as window link File management, available when you open the Camera Raw dialog box from Adobe Bridge or Photoshop, are not available when you open the Camera Raw dialog box from After Effects.
  • Shift-click twice in the image preview area to activate the Auto Temperature and Auto Hue features.

Who among modern people does not like to take photographs? Digital photographs have become almost one of the important components of our lives: mobile convenient selfies, sophisticated photo shoots and simply amateur shots. People love high-quality, good photographs, with the help of which they capture important events, their family, and unique places. And increasingly, SLR cameras are used to create such photographs, and all resulting frames undergo graphic processing.

How to open RAW in Photoshop is asked by many photography enthusiasts and image edits. It would seem that it could be simpler, but in fact, this problem has several nuances.

To answer the question of how to open the Rav camera in Photoshop, you first need to figure out what kind of format it is and why is it needed? "RAW" is translated from English as raw, unprocessed, and in our case means a digital photography format that contains raw data. Files of this format are usually obtained when using SLR, mirrorless, semi-professional digital cameras with non-replaceable lenses. Processing a photo card in the Rav format makes it possible to modify the frame parameters: exposure, saturation, white balance, sharpness, brightness, contrast. All changes can be made before editing. This function makes it possible to obtain the final photograph without losing either too dark or light areas of the frame.

Rav format files are supported by a large number of graphics programs.

Why doesn't Photoshop open RAW? In fact, in Photoshop you can open photos in RAW format, however, for this you use three programs in combination - the Camera RAW converter, Adobe Bridge utilities, Adobe Photoshop. These utilities are interconnected and are a single mechanism for editing and processing raster images and snapshots.

How to open Camera RAW in Photoshop?

Go to the editor's main menu, select the "File" menu and the "Open" command. In the window that appears, select the required Rav file. Select it with the mouse and click the “Open” button. This way the file will open immediately in the converter. This method is also used to open several files at once.

Opening RAW via Adobe Bridge

How to upload one photo

To open one image in the converter, you need to select the photo in the Adobe Bridge mini-image window by clicking the left mouse button, then use Ctrl+R. Or right-click on the thumbnail of the image, and from the menu that appears, select the “Open in Camera RAW” command. In this case, the picture will appear in the converter window, without using Photoshop, ready for transformation.

Having opened a photo in Rav format, you can then edit and adjust it in a variety of ways, achieving the desired result.

How to upload multiple photos at once

To load multiple images into Camera RAW, you need to select them in the Adobe Bridge thumbnail window by simultaneously pressing the Ctrl/Shift keys and selecting them with the mouse, then press Ctrl+R. After you right-click, select the “Open in Camera RAW” command, you can also use the aperture icon, which is located under the main menu.

After completing the above steps, all your selected images will appear in the converter. Their smaller copies will be available on the left side of the window, which allows you to conveniently switch between pictures. If the thumbnail strip interferes with your work, then you can move its border to the left side of the editor interface, in which case it will be minimized and the selected picture will be stretched to fill the entire screen.

How to properly close a photo after editing?

To properly close the photo, saving all the changes and adjustments made, click on the “Done” button, which is located at the bottom of the program window. If you want to save the photo without saving the edit in RAV format, you just need to select “Cancel”. If you need to return to Photoshop and transfer the photo card there while saving all the settings you have made, you must use the “Open Image” command.

Working with Rav extension files is very convenient and easy using Photoshop. This editor in conjunction with a converter allows you to change, edit and process your photos and images to obtain the desired result, making them brighter, richer and more interesting.

Camera RAW is the most popular plugin for Photoshop. It comes bundled with many versions of Photoshop, but there is often a need to update it, since it is updated more often than Photoshop itself. Moreover, if you downloaded the Portable version of Photoshop, this plugin may not be there. Well, be that as it may, I’ll still tell you in detail now how to update to the latest version.

In this case, the installation will take place by copying just one file, you will not get any errors, and I am almost sure that this method will work for other, later versions of Camera RAW.

So, if you are trying to open a RAV file and you get this error:

then know that you do not have the plugin installed for Photoshop at all.

If you just have an old version of the RAV Camera, then you can simply go to the Help—>Updates menu. But there may also be a problem here. If you are using an unlicensed version (and who uses it now, if not in the West?), then you may receive the following error:

But there is definitely an effective way that will help you.

you can go to the official Adobe website and try to download the plugin there. Select our OS version.

So, this installation package contains the Camera RAW plugin. Although you won't find a file with that name. Let's go inside the AdobeCameraRaw-6.6-mul-AdobeUpdate.zip archive. Next to the payloads folder and

  • if you have 32-bit Photoshop version , then in the folder AdobeCameraRaw6.0All-011211024650 there is an archive Assets2_1.zip, which contains file 1003. That’s right, without an extension. Copy it to your Photoshop plugins folder. For CS5, this could be the path \App\PhotoshopCS5\Plug-ins\ (which is in the folder where you installed Photoshop). Rename it Total Commander in Camera Raw 6.6.8bi. That's right, with expansion. You can also download .
  • if you have 64-bit Photoshop version , then the folder for you is AdobeCameraRaw6.0All-x64-011211031019, it contains the archive Assets2_1.zip with a file without the 1002 extension, which also needs to be renamed to Camera Raw 6.6.8bi.

That's it, restart Photoshop and use the latest version of the plugin.

IMPORTANT! This way you can update absolutely any version of Camera RAW . . Just remember that some recent versions of Camera RAW will not be compatible with older versions of Photoshop.

ATTENTION! If you still had at least some version of the camera installed, then simply placing the new version in the plugins folder may not achieve anything. This can happen if you are using a Photoshop assembly other than the cracked licensed one. This is the so-called “Repack”. Repacks work the same way as the main programs, but either something has been added to them, or something has been cut back. In this case, you should look in the folder with plugins in the folder File Formats. If you don’t see a file there that says Camera RAW in its name, then here’s what you need to do: you have to launch Photoshop and try to open the raw file in it. Then in the folder File Formats start moving plugins one by one to a folder in a different location. The file that could not be moved is the RAV Camera, only under a different name. Close Photoshop, delete this file (this can be done because it will no longer be used by Photoshop), and return the plugins that you moved to another folder.

That's all. If you have questions, you can ask them in the comments.

——————————————

If you are interested in packaging products - stretch, tape, courier bags, you can find the full range.

To open a JPEG or TIFF image from Windows Explorer on your computer, you must do the following.
Open Photoshop and go to the main menu tab File --> Open As. In the “Open” window, click on the desired file, then click on the button located in the lower right corner (by default it says “All Formats”). A menu will open where you select “Camera Raw”:

After that, the button will change to “Camera Raw”, then click on the “Open” button.

The JPEG image opens in the Camera Raw window.

How to open several pictures at once.

You can open multiple files at once in Camera Raw. Several RAW files can be opened directly from a computer folder; to do this, you first need to select them by holding Ctrl, then simply double-click on any of the selected files with the left mouse button and they will all open in Camera Raw.
You cannot open multiple JPEG or TIFF files from Window Explorer.

It's better to open multiple images through Adobe Bridge, so you can open not only multiple RAW files, but also JPEG or TIFF. Just as before, select the required files by holding Ctrl or Shift and right-click on any of them. A menu will open where you can select Open in Camera Raw, or instead press Ctrl+R after selecting your files.

Only one image will open in the window, the rest will be displayed in the form and appear as a column on the left with thumbnails of the images:

Editing JPEG and TIFF Images in Camera Raw

A few words about JPEG and TIFF editing in Camera Raw. When you make changes to a JPEG or TIFF and click the "Open Image" button at the bottom, this action opens the image in Photoshop.

However, if you want to save the changes you made in Camera Raw without opening the photo in Photoshop, click the Done button instead and your changes will be saved. But there is a big difference between editing JPEG or TIFF images and editing RAW images. When you click the "Done" button, you physically change the actual pixels of the original JPEG or TIFF, whereas this does not happen with a RAW image (this is the second big advantage of working with RAW). If you click the Open Image button and open a JPEG or TIFF file in Photoshop, you are also opening and editing an actual image. Remember this.

Two Camera Raws

And one more thing: there are actually two Camera Raws - one in Photoshop and one separately in Bridge. The benefit of having two Camera Raws comes into play when you're processing and/or saving a lot of RAW images—they can be processed in Camera Raw in Bridge while you're working on something else in Photoshop. If you use Camera Raw more often in Bridge, you'll probably find the Ctrl+K shortcut useful. It allows you to open Bridge's Preferences window, go to the General tab at the top left, and then check the Double-Click Edits Camera Raw Settings in Bridge checkbox. Bridge)