Menu
homeYandex

How to play on a local network? Co-op games on a PC over a local network How to play via a cord over a local network

Hello.

Even 10-15 years ago, having a computer was almost a luxury, but now even having two (or more) computers in the house does not surprise anyone... Naturally, all the advantages of a PC appear when you connect it to a local network and the Internet, for example: network games, disk space sharing, fast file transfer from one PC to another, etc.

Not long ago I was “lucky” to create a home local network between two computers + “share” the Internet from one computer to another. I’ll tell you how to do this (from fresh memory) in this post.

1. How to connect computers to each other

The first thing you need to do when creating a local network is to decide how it will be built. A home local network usually consists of a small number of computers/laptops (2-3 pcs.). Therefore, 2 options are most often used: either computers are connected directly using a special cable; or use a special device - a router. Let's look at the features of each option.

Connecting computers “directly”

This option is the simplest and cheapest (in terms of equipment costs). In this way you can connect 2-3 computers (laptops) to each other. At the same time, if at least one PC is connected to the Internet, you can allow access to all other PCs on such a network.

What is needed to create such a connection?

1. A cable (also called twisted pair), slightly longer than the distance between the connected PCs. It’s even better if you immediately buy a crimped cable in the store - i.e. already with connectors for connecting to the computer’s network card (if you crimp it yourself, I recommend that you familiarize yourself with it:).

By the way, you need to pay attention to the fact that the cable is needed specifically to connect a computer to a computer (cross connection). If you take a cable to connect a computer to a router - and use it to connect 2 PCs - such a network will not work!

2. Every computer must have a network card (all modern PCs/laptops have one).

3. Actually, that’s all. Costs are minimal, for example, a cable in a store to connect 2 PCs can be bought for 200-300 rubles; There are network cards in every PC.

All that remains is to connect 2 system units with a cable and turn on both computers for further settings. By the way, if one of the PCs is connected to the Internet via a network card, then you will need a second network card - to be used to connect the PC to the local network.

The advantages of this option:

Fast creation;

Easy setup;

The reliability of such a network;

High speed when exchanging files.

Minuses:

Extra wires around the apartment;

To have access to the Internet, the main PC that is connected to the Internet must always be turned on;

Inability to gain access to the network for mobile devices*.

Creating a home local network using a router

A router is a small box that greatly simplifies the creation of a local network and Internet connection for all devices in the house.

It is enough to configure the router once - and all devices will be able to immediately connect to the local network and access the Internet. Nowadays you can find a huge number of routers in stores, I recommend reading the article:

Desktop computers connect to the router via a cable (usually 1 cable is always included with the router), laptops and mobile devices connect to the router via Wi-Fi. You can see how to connect a PC to a router (using the example of a D-Link router).

The organization of such a network is described in more detail in this article:

Pros:

Set up the router once, and Internet access will be available on all devices;

No extra wires;

Flexible Internet access settings for different devices.

Minuses:

Additional costs for purchasing a router;

Not all routers (especially those from a low price category) can provide high speed on the local network;

It is not always so easy for less experienced users to set up such a device.

2. Setting up a local network in Windows 7 (8)

After the computers are connected to each other by any of the options (whether they are connected to a router or directly to each other), you need to configure the Windows OS for full operation of the local network. Let's show the example of Windows 7 OS (the most popular OS today; in Windows 8 OS the setting is similar + you can familiarize yourself with it).

2.1 When connecting via a router

When connecting via a router, the local network, in most cases, is configured automatically. The main task comes down to setting up the router itself. Popular models have already been discussed on the blog pages earlier; I will provide several links below.

After setting up the router, you can start setting up the OS. So…

1. Setting up a workgroup and PC name

The first thing you need to do is set a unique name for each computer on the local network and set the same workgroup name.

For example:

1) Computer No. 1

Working group: WORKGROUP

Name: Comp1

2) Computer No. 2

Working group: WORKGROUP

Name: Comp2

To change the PC name and workgroup, go to the control panel at the following address: Control Panel\System and Security\System.

Windows 7 System Properties

2. File and Printer Sharing

If you do not take this step, then no matter what folders and files you provide for public access, no one will be able to access them.

To enable the option to share printers and folders, go to the control panel and open the “Network and Internet” section.

Now click in the left column on the item “ change advanced sharing settings«.

Several profiles 2-3 will appear in front of you (in the screenshot below there are 2 profiles: “ Home or work" and "General "). In both profiles you need to allow file and printer sharing + disable password protection. See below.

Setting up sharing.

More sharing options

After making the settings, click " save changes" and restart your computer.

3. Sharing shared folders

Now, in order to use files on another computer, the user needs to share folders on it (give general access to them).

This is very easy to do - in 2-3 mouse clicks. Open File Explorer and right-click on the folder you want to open. In the context menu select " Sharing - HomeGroup (Reading)«.

Next, you just have to wait about 10-15 seconds and the folder will appear in public access. By the way, to see all the computers on your home network, click on the “Network” button in the left column of Explorer (Windows 7, 8).

2.2 When connecting directly + sharing Internet access on a second PC

In principle, most of the steps for setting up a local network will be very similar to the previous option (when connecting through a router). To avoid repetition, I will mark steps that are repeated in parentheses.

1. Setting up the computer name and workgroup (similarly, see above).

2. Setting up file and printer sharing (similarly, see above).

3. Configuring IP addresses and gateways

Greetings to all readers.

Most computer games (even those that came out 10 years ago) support multiplayer play: either over the Internet or over a local network. This, of course, is good, if not for one “but” - in many cases it will not be possible to connect to each other without using third-party programs.

There are many reasons for this:

For example, the game does not support playing over the Internet, but there is support for local mode. In this case, you must first organize such a network between two (or more) computers on the Internet, and then start the game;

Lack of a “white” IP address. It's more about organizing Internet access by your provider. Often in this case it is impossible to do without using software at all;

The inconvenience of constantly changing the IP address. Many users have a dynamic IP address that is constantly changing. So, in many games you need to specify the IP address of the server, and if the IP changes, you have to constantly enter new numbers. To avoid this, special tools will come in handy. programs…

In fact, we’ll talk about such programs in this article.

GameRanger

Supports all popular versions of Windows: XP, Vista, 7, 8 (32/64 bits)

GameRanger is one of the most popular programs for playing games on the Internet. Supports all the most popular games, among them there are all the hits that I simply could not help but mention in this review:

Age of Empires (The Rise of Rome, II, The Conquerors, Age of Kings, III), Age of Mythology, Call of Duty 4, Command & Conquer Generals, Diablo II, FIFA, Heroes 3, Starcraft, Stronghold, Warcraft III.

In addition, there is simply a huge community of players from all over the World: more than 20,000 - 30,0000 users online (even in the morning/night hours); about 1000 created games (rooms).

During installation of the program, you will need to register by indicating your work email (this is mandatory, you will need to confirm your registration, and if you forget your password, you will not be able to recover your account).

After the first launch, GameRanger will automatically find all installed games on your PC and you will be able to see games created by other users.

By the way, it is very convenient to look at the server ping (marked with green bars:): the more green bars, the better the quality of the game will be (less lags and errors).

In the free version of the program, you can add 50 friends to your bookmarks - then you will always know who is online and when.

Works in: Windows XP, 7, 8 (32+64 bits)

A rapidly gaining popularity program for organizing online games. The principle of operation is somewhat different from GameRanger: if you go into a created room there, and then the server starts the game; then here each game already has its own rooms for 256 players - each player can launch their own copy of the game, and the rest can connect to it as if they were on the same local network. Comfortable!

By the way, the program contains all the most popular (and not popular) games, for example, here’s a screenshot of the strategies:

Thanks to such room lists, you can easily find friends for many games. By the way, the program remembers “your rooms” that you entered. In addition, each room has a good chat that allows you to negotiate with all the players on the network.

Result: a good alternative to GameRanger (and perhaps GameRanger will soon be an alternative to Tungle, because Tungle is already used by more than 7 million players around the world!).

Of. website: http://www.langamepp.com/langame/

Full support for Windows XP, 7

This program was once unique in its kind: nothing simpler and faster to set up could simply be found. LanGame allows people from different networks to play games where such an option is not provided. And for this you don’t need an Internet connection!

Well, for example, you and your friends are connected to the Internet through the same provider, but in online game mode, you cannot see each other. What to do?

Install LanGame on all computers, then add each other’s IP addresses to the program (don’t forget to turn off the Windows firewall) - then all you have to do is start the game and try to turn on the online game mode again. Oddly enough - the game will start multiplayer mode - i.e. you will see each other!

Although, with the development of high-speed Internet, this program is losing its relevance (because even with players from other cities you can play with a very low ping, despite the lack of a local connection) - and yet, in narrow circles it can still be popular for a long time.

Hamachi

Works in Windows XP, 7, 8 (32+64 bits)

Hamachi was once a very popular program for organizing a local network over the Internet, used in many games for multiplayer mode. Moreover, there were very few worthy competitors.

Today, Hamachi is more needed as an “insurance” program: not all games are supported by GameRanger or Tungle. Sometimes, some games are so “capricious” due to the lack of a “white” IP address or the presence of NAT devices - that there are simply no alternatives to playing through Hamachi!

Overall, a simple and reliable program that will be relevant for a long time. Recommended for all fans of rare games and those connected to the Internet through “problematic” providers.

Alternative programs for playing online

Yes, of course, my list of 4 programs above did not include many popular programs. However, I was based, firstly, on those programs with which I had experience working, and, secondly, in many of them the online players are too small to consider them seriously.

For example, Game Arcade- a popular program, however, in my opinion, its popularity has been falling for a long time. There is simply no one to play with in many games; the rooms stand empty. Although, for hits and popular games the picture is somewhat different.

Garena- also a fairly popular program for playing on the Internet. True, the number of supported games is not so large (at least in my repeated tests - many games could not be launched. It is possible that now the situation has changed for the better). As for hit games, the program has gathered a fairly large community (Warcraft 3, Call of Duty, Counter Strike, etc.).

That's all, I will be grateful for interesting additions...

Many gamers of our time, and even those of the past, have repeatedly thought about how to play over a local network. This problem is not relevant for the physical version of the network itself. That is, computers that are connected to each other by cables can exchange data without problems. Another question: how to play on a local network if there is no local network? No one will hide the fact that more than 50% of gamers have pirated copies of games that are not able to access the official servers where people with licensed versions play. So the question of how to play locally, as it is also called, in the absence of it physically, makes the situation very difficult. If you know the type of data transfer in any computer connection, you can understand that playing over a local network means sending information about the game directly between devices, that is, there is no need to create separate servers for it. The host can be a person who wants to create a game. And there will be no restrictions on players. If the network mode is designed for 8 people, then there can be a maximum of them, that is, all 8 players can be present.

Online battles are great

If you look at it globally, the question of how to play over a local network over the Internet is asked incorrectly. The question needs to be asked about how to implement cable connection support when it is not physically available. Fortunately, this problem has already been solved. The advantages of a real game over a LAN network are that in this case there will be no ping, that is, a response to the action, or, simply put, there will be no delays. Unlike a virtual network, a real local network is created using a hub, a point to which all computers on the network connect, and the PCs themselves. In virtual ones, any user who will create the game can act as the first. It is very comfortable. If we talk about such an indicator as local network speed, then any game project, even the newest one, will not require an Internet connection higher than 20 megabits per second. That is, the maximum capabilities will not be used even by a quarter. And the modern Internet produces values ​​2-3 times more than 20 megabits, which is more than enough.

Implementation principles and technical data

As for the virtual local network itself, its implementation takes place using a special network adapter, which plays the role of an imaginary network card necessary to connect the computer to a software branch. This software adapter bears the name of the application from which it was extracted. It is assigned a personal local network address, which differs from all computer addresses and often begins not with 192, as we are used to, but with ones and tens.

Explicit examples of programs for creating such a network are the Tangle or Hamachi applications. Each of them has its own advantages. Hamachi has a minimalistic interface and can create virtual networks directly between computers. This program is very simple, and because of this, there are practically no problems with installing and implementing new connections. "Tangle" looks like a multi-server program. That is, after installing this application, you will be able to play those games that are created by its users. All of them are very conveniently distributed in the so-called “rooms”. So don’t be surprised if, when asked how to play over a local network, you are advised to install both programs at once.

Greetings friends, I finally got around to writing an article “How to play Minecraft online with friends.” Quite an interesting question that almost every player in the Minecraft universe faces. Therefore, I will tell you some of the easiest ways to play with a friend. All of our methods below are free! How to play Minecraft online for free.

And so we went:

The attachment:

  • Each method works in the licensed version of Minecraft as well as in the pirated version.
  • Each method works on all versions of the game including early ones (1.0.1, 1.1, 1.2.5, 1.3.1, 1.3.2, 1.4.2, 1.4.6, 1.4.7, 1.5, 1.5.2, 1.6, 1.6. 2, 1.6.4, 1.7, 1.7.2, 1.7.5, 1.7.4, 1.7.10, 1.8, 1.8.1, 1.8.8, 1.8.9, 1.8.7).
  • More than 5 working ways to play Minecraft online with friends

How to play Minecraft with a friend using Hamachi

First you need download Hamachi for all gaming PCs which will be used for playing online. Next, you need all players to have identical versions of the Minecraft game.

With the help of Hamachi we will create a virtual server on which you can play with friends. For those who create a server, you need to do:

  • Open (create) a new room in Hamachi.
  • Do not write anything in the IP server field (leave it blank).
  • Start the server.
  • Send the received IP Address to the friends with whom you will play.

For those who are connecting:

  • Enter the same room with the server (which was created by 1 player).
  • Connect using the provided IP address from the room creator.
  • Note: to play online, all players must have the same version of Minecraft.

How to play Minecraft with a friend over a local network

This method is suitable for those who do not have internet. To do this, you need an Ethernet cable (connect them between the PC).

On Windows 7:

  • Go to the Start menu - Control Panel - Network and Sharing Center - Change adapter settings (in the left column).
  • Find the local connection and right-click and select “Properties”.
  • In the window that opens, uncheck the “Internet Protocol 6 (TCP/IPv6)” box.
  • Below you will see “Internet Protocol 4 (TCP/IPv4”) - click on property.
  • Check the box: Use the following IP addresses and enter the following data:

IP address: 192.168.0.1

Subnet mask: 255.255.255.0

Default Gateway: 192.168.0.2

  • Next, check the box: Use the following DNS servers and enter:

Preferred DNS Server: 192.168.0.2

Click on the button - OK. Ready! The guys are done.

How to play Minecraft with a friend online

An easier way that does not require any programs.

  • Open Minecraft.
  • Create a new world and select “open for network” in the menu (ESC).
  • We select all the settings that you chose when creating the world.
  • Click on: “Open the world to the network” and in the chat you can see a partial address of your world.
  • Next, you need to find out your IP address and enter IP:Port instead of zeros.
  • We already saw the port in the chat, it looked like this: 0.0.0.0:51259 (the last 5 digits are different for everyone).
  • Then, instead of Zeros, we write down the IP address and give it to a friend. It should look something like this: 95.56.216.145:51259.

How to play Minecraft with a friend on a server

Well, I think one of the simplest ways. To play with a friend online, select from our Minecraft server monitoring any free server or the server that you like best and you can play with a friend and with other players. Well, or choose any free (less popular) server and sit there with a friend.

Another way:

Play Minecraft with friends online

To play any game over a local network, you must first configure this network. In this article we will tell you how you can set up a local network in different operating systems, as well as between them.

In order to connect 2 computers in one room into a local network, you don’t need anything else except 1 RJ-45 cable, connect the 2 computers with a wire and set up the network.

Let's consider several connection options:

  • Setting up and connecting 2 or more computers to a local network on Windows XP
  • Setting up and connecting 2 or more computers to a local network on Windows Vista
  • Setting up and connecting 2 or more computers to a local network on Windows 7
  • Setting up and connecting 2 or more computers to a local network between Windows XP and Windows 7
  • Setting up and connecting 2 or more computers to a local network on OS Windows 8.x
  • Setting up and connecting 2 or more computers to a local network on Windows 10

There can be from 2 to 254 computers on a local network, I think this is enough to play with friends :) The network address should not start with 127.*.*.*, because reserved for testing and not available for use. Otherwise, you can use any IP addresses, but we recommend starting your addresses with 192.168.1.1, as this is the standard for small local networks.

To connect more than 2 computers to the network, you will need one of the options:

1. Additional input for a network card. (apartment, office)

2. Use a "switch". (apartment, office, entrance)

3. Use a router. (apartment, office, entrance, house, street)

A little more detail about each option:

1. Not everyone can insert another network card into a computer; there must still be room for it in the system unit, and if you connect laptops, then the option is a failure.

2. A switch is an additional device with which you can connect a different number of computers to the network depending on the switch model, usually from 4 to 48. You can use a circuit of several switches, connecting them in series, thereby increasing the number of computers in the network.

3. Router or (router). The ability to network computers both wired and wirelessly, depending on the router model. The big advantage of this device is that you only need to configure it once, and connect computers to it, and the router will distribute the settings to all computers on the network automatically, regardless of the installed operating system.