Where can I get the iPhone 6s restrictions password code. Pinfinder: I’ll help you quickly remember your forgotten restriction password on your iPhone and iPad. Restrictions password recovery
Tired of entering your password every time you unlock your iPhone? So it's time to remove it! In this article we will tell you how to disable the unlock code and restriction password, as well as what to do if the treasured combinations are forgotten.
This procedure is very simple, follow the instructions below:
1 Open the Settings menu. 2 Find the “Password” item and tap on it. Important! If you have an iPhone 5S, iPhone 6/6S, SE or iPhone 7, you need to find the “Touch ID & Passcode” item. If your i-gadget runs on an iOS version lower than 7.1, you must first find the “General” item in the “Settings” menu, then in this section - the “Password protection” line.
All! You will no longer need to enter a code to unlock your device.
How to reset a forgotten unlock password on iPhone?
As you can see, if the user remembers his password, removing it is not at all difficult. But, despite the fact that most users use a 4-digit numeric code, there are often cases when it simply slips out of their heads, let alone those situations when someone decided to play James Bond and set a more complex combination - iPhone settings provide this opportunity.
So what to do when the treasured code is forgotten? Is it possible to remove the password in such a situation? Let us please you, there is a way out here, and not just one, but three.
Resetting the counter for entering incorrect passwords
If the code has not completely slipped your mind, and you roughly remember it, then you have a chance to remember it by simply brute force. However, the device will count incorrect attempts, but on the 10th it will suspect something is wrong and block all actions for a minute. After this time, you will be able to resume the search again, but now “sanctions” will be imposed against you after each new incorrect attempt - the first mistake will threaten to be blocked for 5 minutes, the second - for 15 minutes, and so on in increasing order.
After 10 incorrect attempts, the device will be permanently blocked, but if you believe that brute force will save you, you can connect your smartphone to iTunes, reset the counter of incorrect attempts and continue brute force again. How to do it?
1 Connect your iPhone to your PC with iTunes as usual. Of course, you need to connect not to any PC with iTunes, but to the one with which you have already “friended” your iPhone before. 2 As soon as the program detects the device, select it, click on the “Browse” tab, then click the “Synchronize” button.
When the synchronization procedure is completed, the iPhone will be unlocked and you can continue to try passwords. But, of course, the “sanctions” will still be relevant - if you entered the password incorrectly 10 times, you will be blocked for a minute, and so on in increasing order. If you make a mistake 20 times, the smartphone must be connected to iTunes again.
In general, if you have a couple of password options, it makes sense to guess it by brute force. But in the case when you don’t remember the secret code at all, don’t stress yourself or your smartphone once again, but immediately proceed to one of the more drastic reset options presented below.
Resetting your password via iTunes
iTunes allows you not only to reset the counter of incorrect attempts, but with the help of the program you can completely remove the password. But! If you have not backed up data on your smartphone, this method risks complete loss of all information. On the other hand, if you completely forgot the secret unlock code, you have no other choice.
So, how to disable the passcode on any iPhone via iTunes? We follow the following instructions:
1 Connect the smartphone to the PC in Recovery Mode - to do this, you need to turn off the device, press the Home button and, while holding it, connect the iPhone to the PC. After some time (it may take 5 seconds, or maybe a minute), an image of the iTunes icon and the iPhone cable will appear on the display (if you have an iPhone 4S and older versions, the cable will be wide, if the iPhone 5 and younger models will be narrow).
That's it - all you have to do is wait for iTunes to do its job and you will have a clean iPhone with the passcode disabled.
Resetting your password via iCloud
You can also reset your password using the iCloud service; to do this, follow this guide:
1 Log into iCloud via PC and enter your Apple ID. 2 In the “All devices” section, find your iPhone - there should be a green dot next to it, meaning that the device is online, otherwise nothing will work.
The advantage of this method is that you do not need a PC with iTunes, with which your device has been synchronized at least once - you can access the “cloud” from any computer (or even from a mobile device), however, it will be necessary for the iPhone to have access to the network. Essentially, iCloud and iTunes do the same job, you just need to choose the most convenient method.
How to recover data on iPhone after resetting it?
So, after iCloud or iTunes completes the reset procedure, you will receive a “clean” iPhone; when you turn it on, you will see the initial setup screen, which you probably already saw when you turned on your smartphone for the first time.
If you backed up your data in iTunes or iCloud, then during the initial setup you can “ask” the installer to extract all the information from the backup. If you didn’t make a backup, you will only be able to get a “clean” iPhone; you will lose all your data, but you will get an unlocked device.
How to disable restriction passcode on iPhone?
The iOS operating system offers users another type of password - a restriction password, which can be used to restrict access to a particular application or even to a particular function within an application.
To disable it you need to:
1 Open the “Settings” menu, then “General”. 2 Find the “Restrictions” item, tap on it - after tapping you will be asked to specify the restrictions password.
What to do when you forgot your restrictions password?
Restriction codes are forgotten much more often than unlock codes. Well, it’s true that I banned something and forgot, but when I needed access to an application or function that was subject to a restriction, I found myself in an awkward position. What to do? Firstly, it’s worth saying that you can reset the restrictions password, just like the screen unlock code, by resetting all settings via iTunes or iCloud, but there is also a less drastic way. True, it cannot be called simple, but what can you do? To reset a forgotten restriction code you need to:
1 Download and install the iBackupBot program. 2 Connect your iPhone to your PC and perform the backup procedure in iTunes.
Let's summarize
So, the answer to the question - how to remove the password on iPhone if you remember it - is very simple. This also applies to the unlock password and restriction code. However, if the treasured code has slipped out of your head, this can lead to very dire consequences, especially if you do not keep backup copies. So if you are one of the forgetful people, we strongly recommend that you back up your data, and write down the password itself (especially the unlock code) somewhere and hide the piece of paper in a treasured place. We do not recommend disabling the unlock code at all, because today we store too much important information on our smartphone to allow ourselves the luxury of not using a password.
Hello everyone! An interesting situation happened to me recently - in order to respond to a comment, I needed to dig into the settings of my iPhone and see if it was possible to set restrictions on a certain program in iOS. As usual, I open “Settings - General - Restrictions”, run into the sign “Enter the password code for restrictions” and understand that I simply do not remember these treasured four digits!
Of course, in the end everything ended well, but this situation made me think about this... If even I, a person who constantly tinkers with the iPhone and iPad, managed to somehow forget the password for restrictions, then what can we say about the ordinary user who uses this setting once a year, and only on major holidays?
Most likely, many will not even remember the fact that they installed this code at all. Not to mention some numbers. And now what i can do? So you can walk around without access to all the settings? Of course not. There are two options for solving this problem. Go!
By the way, remember - there is no “factory”, “factory”, “standard” password. The code is set by the user himself when opening the restrictions settings for the first time.
Now let's go for sure! :)
Method No. 1. Completely remove the password
There is only one way to remove the code without knowing it - through firmware recovery. There is nothing complicated about this:
But this method has some very big disadvantages:
- Yes, you will get rid of password restrictions. But absolutely all information will also be deleted from the device!
- Are you thinking about restoring data from a backup? There are also some “troubles” here. After all, if a copy was created at a time when the code was already installed, then when it is restored, the restriction password will return to the device.
In general, the method works, but is not very convenient - there are too many reservations when using it. Luckily, there are other options...
Method No. 2. Find out the code
Yes it is possible. And most importantly, we don’t even need to strain our memory and remember a forgotten password. A special program will do everything for us!
This very program “pulls” the code from the backup copy. Accordingly, there must be at least one copy on the computer, which includes the restrictions password. If you don’t have one yet, just do it.
Victory! All that remains is to remember them and never forget them :) And finally, a few questions and answers:
- Is this a safe program - can it be used at all? Can. Especially considering the fact that it is openly posted on GitHub (the world's largest resource for hosting IT projects and their joint development).
- What versions of iOS does it work with? I checked it works on iOS 10, 11 and 12 - everything is fine. However, judging by the description, absolutely any firmware version is supported starting from iOS 7 (inclusive).
As you can see, everything is very simple, multifunctional and safe. Nothing complicated! However, if something doesn’t work out for you or you still have some questions, be sure to write in the comments, we’ll try to figure it out together and find a solution!
Updated! I completely forgot one very important thing when using the PinFinder program. Since the password is “pulled” from the backup copy, you need to remember this - this same backup copy should not be encrypted. Otherwise, PinFinder will swear and throw an error. How to remove encryption? It’s simple – connect your iPhone, launch iTunes and uncheck the corresponding menu item.
However, at the moment this setting (encryption) is no longer relevant, since...
Updated 2! To be honest, I didn’t even expect such attention to my modest blog, but the author of the program (Gareth Watts) wrote in the comments (for which I thank him very much!) and said that a new version of PinFinder 1.6.0 had been released. Support for encrypted backups has been announced - now it is not necessary to disable encryption in iTunes in order to find out the iPhone restrictions password. Simply great!
Updated 3! A new version of the program has been released - PinFinder 1.7.1. What's new? Support for iOS 12 has arrived - now you can find out the “Screen Time Passcode” (formerly “Restrictions”) without any problems. Hooray!!! True, in iOS 12 Apple slightly reworked the security policy and now the Screen Time passcode can only be retrieved from an encrypted backup. Remember this and be careful!
P.S. Everything worked out? A huge request - do not be lazy to write a couple of lines in the comments about how you removed the password code for restrictions. Thank you!
P.S.S. The instructions helped, but too lazy to write anything? Please like and click on social networks - the author will be very grateful! Thanks again!
Happens to everyone. I came up with and set a password on my iPhone, and then forgot it. Or you haven’t used your smartphone for a long time. Be that as it may, it is better to know what to do and how to unlock your iPhone if you forgot the password.
In this guide, I will describe three ways to reset your iPhone password. These methods will not help if, only contacting Apple support will help.
If the password is entered incorrectly 6 times, the iPhone will be blocked for one minute; if you enter the wrong password again, the iPhone will be blocked for 2 minutes, then 3, and so on. In general, it’s not realistic to guess the password; life won’t last long.
If you have the “Erase data” function activated, then guessing the password is dangerous. This function will erase all information from the iPhone if you enter the password incorrectly 10 times. To disable it you need to: go to settings – password – opposite the “erase data” field, switch the toggle switch to disabled mode.
Below are three ways to reset a forgotten password on iPhone, here they are...
1. Reset your iPhone password by restoring it from a backup.
If you systematically sync your iPhone with iTunes, you should have and can restore one of the copies where the password is still set. This is the best way, all media files and information will remain on the iPhone.
2. Reset your password using Find My iPhone
If you have the Find My iPhone function activated, you can use iCloud to remove the lock password, however, all data will also be erased. This method works if you forgot your iPhone lock password, but remember your Apple iD password.
Now you can restore your iPhone from backup or set it up as new.
3. How to reset iPhone if you forgot your password
If you've never synced your iPhone with iTunes, don't have a backup, and don't have Find My iPhone enabled in iCloud, your only option for removing the passcode is the recovery mode method. I note that this method always works, but not only the password will be erased on the iPhone, but also all media files and information.
Step 1. To get started, you need to enter your iPhone into
To enter recovery mode: turn off the iPhone, now hold down the Home button and without releasing it, insert the USB cable, an iTunes icon with a cord should appear.
Step 2: If iTunes doesn't open automatically, open it. You should immediately be prompted to update or restore your iPhone.
Step 3. Select “Restore” and wait for the recovery to complete. At the end of the process, the iPhone will be “clean” as if it came from a store and without passwords. Use it!
Still have questions?
Do you still have questions about unlocking your phone if you forgot your iPhone password? Are you having trouble recovering a forgotten ID on your iPhone? Write in the comments and we will try to help you!
If none of the above methods helped you or you don’t remember your Apple ID! Read this manual
It’s easy to forget the password for iPhone and iPad restrictions - once you set it, you can not even remember its existence for a long time, exactly until the function for which you set the restriction is no longer needed. In this guide, we will tell you what to do if you have forgotten your restrictions password on your iPhone or iPad.
If you forget your iPhone or iPad restrictions password, then several key functions of the device automatically become unavailable. The main thing is that all the functions for which you have set these same restrictions will refuse to work without a password. The secondary thing is that it will be impossible to reset the gadget’s settings, which, for example, is necessary before selling the device.
The procedure for resetting the restriction password on iPhone and iPad cannot be called very simple - it requires connecting the device to a computer and using a special program. However, everything looks complicated only at first glance, and if you correctly follow all the steps in the instructions below, then you will not have any problems with resetting the restrictions password.
Step 1. Download the free iBackupBot program
Step 2: Connect your iPhone or iPad to your computer and launch iTunes
Step 3: Create a new backup of your device by going to the gadget tab and clicking the “Back up now” button
Step 4: Install and launch iBackupBot
Step 5. Select in iBackupBot your device whose restrictions password you want to reset
Step 6. Using iBackupBot, find the file com.apple.springboard.plist, which is located along the path System Files/HomeDomain/Library/Preferences
Step 7: Double-click on the com.apple.springboard.plist file to enter edit mode
Step 8. At the end of the file, before the closing tags and and, paste the following code:
Step 9. Save the file by clicking on the save icon or Ctrl + S (for Windows), then close the iBackupBot program
Apple specialists are constantly improving the protection of their iPhones, iPods and iPads, and doing so at a rapid pace. In the iPhone 5S model, in addition to passwords, there are already Touch ID fingerprint scanners, in general, everything is serious. But today it's more about passwords.
Any iPhone phone, iPod touch player or iPad tablet can be protected with a password; setting a password to unlock the device is quite simple, but you can also set a password for restrictions. We came across password restrictions using the example of protecting applications from accidental deletion from the iPhone.
Today we will tell you how to reset the restrictions password on your iPhone or iPad. Indeed, very often there are cases when a user simply forgot his restrictions password and cannot remember it.
A similar situation happened to a friend of mine; he decided to sell his iPad 2 and buy something newer, with a Retina display (I was thinking about an iPad Air or iPad mini 2). Before selling his used tablet, Afanasy tried to reset all settings, but the iPad asked to enter a password, it was a password for restrictions. He entered this password a long time ago and even tried to remember it 11 times, but to no avail.
He began to think and study all possible ways to reset the password. It turned out that in any iPhone or iPad the password for restrictions can be reset in two ways:
- Restore iPad in iTunes (everything is erased)
- Change password manually (all information remains)
In general, Afanasy performed a restoration in iTunes and sold his empty iPad 2, which no longer had any applications or passwords.
But sometimes there are situations when forgetful iPhone or iPad users do not want to lose information when resetting the restriction password. First, they wander around the Internet looking for the standard default password, then they try to remember what password they set for the restrictions; if they still don’t remember, then they come here and read these instructions.
As a result of our experiments, we came to the conclusion that it is not possible to find out the forgotten code, but the restriction password can be reset (by changing it to your own) in any iPhone, iPad or iPod. This can be done both with and without a jail, both in the old iOS 5.1 firmware and in the new iOS 7.
Resetting the restrictions password on an iPhone or iPad without a jail
As an experiment, we put a restriction password into a non-jailbroken device running iOS 7 and will try to reset it without losing information.
To conduct the experiment we will need:
- iPhone, iPad or iPod touch without jail with 7th (or other) firmware
- Computer with iTunes installed and iBackupBot program
- Standard USB cable
- A little care
All actions performed to reset the restrictions password are similar to the previously discussed instructions - “Enable interest on iPod touch.”
1. Connect our iPhone or iPad, we connect the iPod touch to the computer using a USB cable and launch iTunes
2. In iTunes, to avoid further confusion, we deleted all previously made backups (iTunes - Settings - Devices).
3. After deleting the backup copies, here in iTunes we create a new backup copy of our device, to do this, right-click on the iPhone or iPod and select – Create a backup copy. All this happens in the left sidebar, if you don’t have it in iTunes, then read it and turn it on.
The backup has been created, now using the iBackupBot program we will reset the old password, replacing it with a new one. We launch iBackupBot, the shortcut for which appeared on the computer desktop immediately after installation. We see in the program our only backup copy, in it we need to find the file com.apple.springboard.plist, it is located in the following path: System Files / HomeDomain / Library / Preferences.
If you cannot find this file yourself, then use the iBackupBot search.
Once you find the com.apple.springboard.plist file, we recommend saving a copy of it (right mouse click - Export Selected item) just in case.
Double-click on the found file, select Cancel in the registration window that appears, and proceed to editing.
Scroll down and look for a place to insert our new restrictions password. We inserted our code between the commands indicated in the picture, i.e. after the closing tag (above which ContryCode and ru). If you don’t have anything similar, you can paste the code at the very bottom of the file, before the two closing tags And .
The embed code looks like this:
The four zeros indicated at the bottom of the code are our new restrictions password, which we can use upon successful completion of our actions.
After the code is inserted, you need to save the edited file; to do this, you can click on the floppy disk in the upper left corner or Ctrl + S (for Windows users). After successfully saving the appended com.apple.springboard.plist file, you can close the iBackupBot program and open iTunes again.
In iTunes, we need to restore our device (iPhone, iPad or iPod) using an edited backup copy. To do this, in the iTunes program, click on our device and in the General tab, in the Backups section, click the button - Restore from copy. Select our only copy and click – Restore.
Once the restoration is complete, the iPhone (or in our case, the iPod) will reboot. Now you can check whether the old forgotten restrictions password has been reset, to do this, launch the Settings - General - Restrictions application and enter our new password: 0000. If you did everything correctly, the new password will work and you will see the restrictions menu. If the new password of four zeros does not work, it means you did something wrong, in which case we read carefully and try again. Well, for now we’ll tell you about an easier way to reset the restriction password for iPhone, iPod and iPad tablets with a jailbreak.
Changing a forgotten restriction password on an iPad with jailbreak
If you have forgotten your restrictions password, but your device is jailbroken, then resetting the password can be much faster and easier. You don’t need a computer or iTunes for this, you will need:
The advantage of this method is that there is no need to spend a long time making backup copies and restoring. Just launch iFile.
Follow the following path directly in the device: /var/mobile/Library/Preferences look for our file in this directory com.apple.springboard.plist, click on it and select – Text Editor.
We see the code; to start editing it, click the Edit button at the top.
And according to the principle described above (in the method without Jell), insert a magic code into it that will change the forgotten password for restrictions in your iPad or other device to four zeros. The main thing is not to make mistakes when inserting the code. Then in the upper right corner click – Save and confirm with the button – Ready.
Voila, go to the restrictions settings and check our new restrictions password, which we placed to replace the forgotten one. What code and where to insert is shown on the screenshots and described in the first method. The two methods of resetting the restriction password discussed today can be used on iPad, iPhone and iPod, and all data should be preserved.
After you go into the restrictions settings using four zeros, you can disable the restrictions password or change it to a new one that you will never forget. See you friends, train your memory!
