Menu
homeiOS

CrystalDiskInfo: Using basic features. Russian CrystalDiskInfo - checking your hard drive and taking care of its health

If there are multiple drives installed, we can switch between them using the quick switch panel (1), the "Disk" menu item (2) or the side arrows (3):

3. S.M.A.R.T.

This information also appears in the main program window, under the general status:

Field values:

  • ID - attribute number in hexadecimal.
  • Attribute - name of the SMART test.
  • Current - the value that the test currently produces.
  • The worst - the extreme value to which the indicator has ever fallen (rised).
  • Threshold - if the current reading reaches him, this will indicate the poor condition of the media and the need to replace it.
  • RAW values ​​- The current value of the attribute in hexadecimal.

A good explanation of the attributes is presented on the website ixbt.com. Since in most cases information on these attributes is found in English, the program allows you to display S.M.A.R.T. in English (in this case, the main language can be left in Russian). To do this, click Language - S.M.A.R.T. in English:

In case of alarm, very often the smart device issues a warning 05 Reassigned sectors(or 05 Reallocated Sector Count / 05 Rejected sectors / 05 Unstable sectors) - this means that bad sectors were found, the data of which was sent to backup blocks. As a rule, this is a temporary solution, since non-magnetized areas will spread across the disk. In this case, it is best to copy the data to removable media and replace the disk.

4. How to treat

It is important to understand that the alarms shown by this program, as a rule, are irreversible physical damage to the media. For example, remapped sectors are part of bad clusters moved to the spare area of ​​the disk. The media will continue to work, but the number of non-magnetized areas will increase and, at one point, it will be possible to lose all the data.

If temperatures are exceeded, it is necessary to check the computer's cooling system, especially one that blows hot air out of the case.

5. Setting up autorun

To constantly see the status of the media, it is a good idea to add the utility to Windows startup. Open the program - click on Service - Autorun:

We also note Launching the agent (in the notification area) so that the program does not interfere with us when starting the system:

6. Setting up notifications

To receive timely information about a problem with the media, the program provides various notifications. To configure them, click on Service - Notification Features:

The condition of a computer's hard drive is a very important factor in system performance. Among the many utilities that provide information about the operation of the hard drive, the CrystalDiskInfo program is characterized by a large volume of data output. This application performs a deep S.M.A.R.T. analysis of disks, but at the same time, some users complain about the complexity of managing this utility. Let's figure out how to use CrystalDiskInfo.

After running the utility, on some computers, the following message may be displayed in the CrystalDiskInfo program window: “Disk not detected.” In this case, all data on the disk operation will be completely empty. Naturally, this causes confusion among users, because a computer cannot work with a completely faulty hard drive. Complaints about the program begin.

And, in fact, detecting the disk is quite simple. To do this, go to the menu section - “Service”, select “Advanced” in the list that appears, and then “Advanced disk search”.

After completing this procedure, the disk, as well as information about it, should appear in the main program window.

Viewing disk information

Actually, all information about the hard drive on which the operating system is installed opens immediately after starting the program. The only exceptions are those cases mentioned above. But even with this option, it is enough to perform the procedure for launching an advanced disk search once, so that the next time you start the program, information about the hard drive is displayed immediately.

The program displays both technical information (disk name, volume, temperature, etc.) and S.M.A.R.T. analysis data. There are four options for displaying hard drive parameters in the Crystal Disk Info program: “good”, “attention”, “bad” and “unknown”. Each of these characteristics is represented by a corresponding indicator color:

    “Good” – blue or green (depending on the selected color scheme);
    “Attention” - yellow;
    “Bad” - red;
    “Unknown” - gray.

These ratings are displayed both in relation to individual characteristics of the hard drive and to the entire drive as a whole.

In simple terms, if CrystalDiskInfo marks all elements in blue or green, the disk is fine. If there are elements marked in yellow, and even more so in red, then you should seriously think about repairing the drive.

If you want to view information not about the system drive, but about some other drive connected to the computer (including external drives), then you should click on the “Disk” menu item and select the desired drive from the list that appears.

In order to view information about the disk in a graphical version, you should go to the “Tools” section of the main menu, and then select the “Graph” item from the list that appears.

In the window that opens, it is possible to select a specific category of data whose graph the user wants to view.

Launching the agent

The program also provides the ability to run its own agent on the system, which will run in the tray in the background, constantly monitoring the status of the hard drive, and display messages only if problems are detected on it. In order to launch the agent, you just need to go to the “Tools” menu section and select “Run agent (in the notification area)”.

In the same section of the “Tools” menu, by selecting “Autostart”, you can configure the CrystalDiskInfo application so that it will always launch when the operating system boots.

Regulating the hard drive

In addition, the CrystalDiskInfo application has some capabilities for regulating the operation of the hard drive. In order to use this function, again go to the “Service” section, select “Advanced”, and then “AAM/APM Management”.

In the window that opens, the user will be able to control two characteristics of the hard drive - noise and power supply, simply by dragging the slider from one side to the other. Regulating the power supply of the hard drive is especially useful for laptop owners.

In addition, in the same “Advanced” subsection, you can select the “AAM/APM Auto Configuration” option. In this case, the program itself will determine the optimal values ​​of noise and power supply.

Changing the program design

In the CrystalDiskInfo program you can change the color scheme of the interface. To do this, go to the “View” menu tab and select any of the three design options.

In addition, you can immediately enable the so-called “Green” mode by clicking on the item of the same name in the menu. In this case, indicators of normally operating disk parameters will be displayed not in blue, as by default, but in green.

As you can see, despite all the apparent confusion in the interface of the CrystalDiskInfo application, understanding its operation is not so difficult. In any case, having spent time studying the capabilities of the program once, you will no longer have difficulties in further communication with it.

An information application for monitoring the status of the HDD and some other storage media that are connected to Windows. The program monitors and stores information about the current state of hard storage media. While CrystalDiskInfo is running, detailed information about the status of hard drives (HDD) is displayed and their performance and temperature are monitored. The CrystalDiskInfo application uses data from the built-in S.M.A.R.T. function. (Self-monitoring, analysis and reporting technology). This technology is a built-in BIOS feature for every personal computer motherboard. S.M.A.R.T. can be disabled, at the user's request, from the BIOS interface.

The program displays detailed information about the status of hard drives, as well as data such as the serial number of the hard drive, its standard and interface, the total time of recorded operation (read from S.M.A.R.T.), file system, number of areas, etc. In addition, CrystalDiskInfo keeps track of the performance of hard drives and provides a real-time report on errors in reading information from disks, the current performance of each connected device, on/off cycles, and many other functions. In addition, the program implements hard drive management functions such as APM and AAM. (Advanced Power Management is a tool for adjusting the power consumption of a device. The APM function determines the state of the power supply of the system and each individual device (in this case, the hard drive) and sets power consumption parameters. Automatic Acoustic Management is a function of hard drives that is disabled by default, which allows you to reduce operating noise disk by reducing its speed. This function is available for all modern ATA hard drives.

CrystalDiskInfo is a free program for servicing computer HDDs and SSDs with ATA (PATA, SATA), USB and IEEE1394 connection interfaces. If something strange happens to your hard drive, do not be lazy to download CrystalDiskInfo in Russian for your computer for free using the link from the site https://site without registration and SMS. The advantages of the utility include: displaying detailed, reliable information about the status, powerful monitoring and verification tools, as well as effective tools for changing hard drive settings. If problems are detected, Crystal Disk Info displays a warning and sends an email to the user.

Before a large number of bad sectors appear, read and write errors, unpleasant noise, the temperature rises, and performance decreases, it makes sense to download the useful CrystalDiskInfo program for free for a computer with the Microsoft Windows XP, Vista, 7, 8, 10 (32- bit and 64-bit). The utility is quickly installed on your computer and uninstalled correctly, without being tracked in the system registry. When you start the program, it checks the status of the hard drive of your computer or laptop; this takes some time.

Checking, monitoring, analysis, graphs and changing settings

When checking, the utility displays detailed information, including information about external HDD USB and IEEE1394. Displayed: firmware version, AAM*/APM** data, interface type, spindle speed, buffer size, operating life, number of bad sectors, temperature and even a graph of temperature dynamics over time, as well as other technical characteristics. S.M.A.R.T*** parameters are monitored, including: number of read errors, overall performance, start-stops and other data. CrystalDiskInfo dynamically tracks changes in a large amount of data from drives in the system, keeps a log and allows you to beautifully display this in the form of graphs. This format allows you to clearly see the overall health picture of the computer’s disk subsystem.

There will be people who want to download CrystalDiskInfo for free without registration and SMS, without leaving the https://site, also because the utility allows you not only to diagnose the hard drive, but also to take care of its health. Changing the AAM and APM settings allows you to control performance parameters and the corresponding amount of acoustic noise produced, as well as power consumption parameters. If necessary, it is possible to reset the bad sector counters. In the "Tools" menu there is a link to the system "Disk Management", where all the necessary transformations are done with them: create a partition, expand or shrink partitions, etc.

Interface and functionality of CrystalDiskInfo

The nice, modern interface supports many localizations, as well as themes (skins), three of which are available immediately after launch. Positive reviews and comments from users are caused by an intuitive display of the status in color: blue (or green) - good, yellow - warning, red - problems/alarm, gray - no information.

This small, free, open-source utility, developed by Japanese programmer Noriyuki Miyazaki (known as Hiyohiyo), is why many in Europe and America find the menus and settings confusing. The Japanese do not share this opinion. Unfortunately, there are no hints or explanations about the importance of parameters unfamiliar to the average computer user, and to figure it out, sometimes you have to refer to the help section.

Rich functionality allows CrystalDiskInfo to compete not only with free, but also with paid programs. According to reviews and comments from many users around the world, it is definitely worth downloading CrystalDiskInfo for Windows 10, 8.1, 8, 7, Vista, XP (32-bit and 64-bit) for free in Russian. Among the competitors, it is worth noting the paid programs HDDlife Professional and Hard Drive Inspector and the free Active@ Hard Disk Monitor with Russian language support, as well as the paid HD Tune Pro in English. As for the functionality of Crystal Disk Info, you definitely need to know about the following advantages of this utility:

  • high data reliability,
  • correct interaction with S.M.A.R.T technology,
  • monitoring of more than 25 parameters,
  • data on current operating modes in real time,
  • temperature and S.M.A.R.T data control,
  • displaying disk temperatures in the system tray,
  • prompt notification by e-mail about problems,
  • ability to change AAM/APM settings,
  • control of speed and amount of acoustic noise,
  • settings to save energy consumption,
  • no conflicts with the latest versions of SSD drives,
  • work with external HDDs with USB and IEEE 1394 interfaces,
  • compatible with a wide range of equipment****.

reference Information

* Automatic Acoustic Management (AAM) - control of the track search time parameter, in this case, the faster the block of magnetic heads moves along the radius during search, the more noise.

**Advanced Power Management (APM) - energy management.

*** Self-monitoring, analysis and reporting technology (S.M.A.R.T.) - an internal self-diagnosis and self-monitoring system using hardware built into the disk with the ability to generate reports and predict the breakdown period.

**** A comprehensive list of compatible equipment is located on the official crystalmark website in the info domain.

Download the latest version of CrystalDiskInfo in Russian

Free programs download for free

Now you are on the page "Russian Crystal Disk Info - checking the hard drive and taking care of its health", in the Computer Tests section of the site, where everyone has the opportunity to legally download programs for a computer running Microsoft Windows OS. This page was created/substantially updated on 11/20/2018. Thank you for visiting the section.